SUBSONIC WIND TUNNEL 305 mm

A cylinder model with a single pressure tapping point for use with the AF1300 Subsonic Wind Tunnel.

A 150 mm chord 300 mm span NACA0012 aerofoil with pressure tappings for use with the AF1300 Subsonic Wind Tunnel.

A 150 mm chord NACA2412 unsymmetrical section aerofoil with 300 mm span and adjustable flap for use with the AF1300 Subsonic Wind Tunnel.

A set of two aerofoils both of NACA0012 profile and 150 mm chord for use with the AF1300 Subsonic Wind Tunnel.

A 100 mm diameter flat plate for use with the AF1300 Subsonic Wind Tunnel.

A flat boundary layer model to illustrate the phenomena of boundary layer development and separation. For use with the AF1300 Subsonic Wind Tunnel.

A model aircraft with low wing configuration for use in TecQuipment's AF1300 Wind Tunnel.

A model aircraft with high wing configuration for use in TecQuipment's AF1300 Wind Tunnel.

Five drag investigation models for use with the TecQuipment AF1300 wind tunnel - a streamlined shape, a sphere, hemisphere, "dimpled" sphere, and a flat plate. All the models have a 50mm frontal area for easy comparison

An S1210 profile aerofoil of 150 mm chord for use with the AF1300 Subsonic Wind Tunnel.

Five drag investigation models for use with the TecQuipment AF1300 wind tunnel - a streamlined shape, a sphere, hemisphere, "dimpled" sphere, and a flat plate. All the models have a 50mm frontal area for easy comparison

An aerofoil suspended on springs within a frame, used to demonstrate wing flutter. The suspension positions of the wing can be altered, as can the angle of attack.

A tilting 36-tube manometer for use with the AF1300, AF1450 and AF1600 Subsonic Wind Tunnels, other TecQuipment products, or as a general purpose instrument.

Measures angular positions of models mounted on TecQuipment’s Three- Component Balance (AF1300T, AF1450T or AF1600T) with the Versatile Data Acquisition System (VDAS^®).

Digital differential pressure measurement and display unit for use with TecQuipment’s Subsonic Wind Tunnel (AF1300).

The 32-Way Pressure Display Unit displays up to 32 different pressures from models Pitot-static tubes and other measuring instruments fitted to a wind tunnel.

A traversing Pitot-static tube with electronic position measurement for use with TecQuipment’s Subsonic Wind Tunnels (AF1300, AF1450, AF1600).

This smoke generator and probe are an optional ancillary to TecQuipment's AF1125, AF1450 and AF1600. It allows the observation of airflow in subsonic wind tunnels and other airflow situations.

A three-component balance designed for use with the AF1300 Subsonic Wind Tunnel.

A two-component balance to measure the lift and drag forces on models mounted in an AF1300 Subsonic Wind Tunnel.

A frame mounting versatile data acquisition system (VDAS) to allow computer-based data capture for a wide range of TecQuipment products.

Open-circuit, bench top subsonic wind tunnel for a wide range of investigations into aerodynamics. Included with the Wind Tunnel are 3 sets of different models and the Basic Lift and Drag Balance.

An open circuit suction subsonic wind tunnel with a working section of 300 mm by 300 mm and 600 mm long.

An open circuit suction subsonic wind tunnel with a working section of 450 mm by 450 mm and 1000 mm long. Package includes the Aerofoil with Tappings, a Three-Component Balance, two Differential Pressure Transducers, a 32-Way Pressure Display Unit and data acquisition (VDAS-F).

An open circuit suction subsonic wind tunnel with a working section of 600 mm by 600 mm and 1250 mm long. Package includes a Three-Component Balance, Dual Axis Pressure Traverse and associated instrumentation such as a 32-Way Pressure Display Unit and Versatile Data Acquisition System (VDAS-F).