Subsonic Wind Tunnels
BENCH-TOP WIND TUNNEL
Open-circuit, bench top subsonic wind tunnel for a wide range of investigations into aerodynamics. Included with the Wind Tunnel are 3 sets of different models and the Basic Lift and Drag Balance.
SUBSONIC WIND TUNNEL 300mm
An open circuit suction subsonic wind tunnel with a working section of 300 mm by 300 mm and 600 mm long.
SUBSONIC WIND TUNNEL 450mm
An open circuit suction subsonic wind tunnel with a working section of 450 mm by 450 mm and 1000 mm long. Package includes the Aerofoil with Tappings, a Three-Component Balance, two Differential Pressure Transducers, a 32-Way Pressure Display Unit and data acquisition (VDAS-F).
WINGLETS AND END PLATES
Five drag investigation models for use with the TecQuipment AF1300 wind tunnel - a streamlined shape, a sphere, hemisphere, "dimpled" sphere, and a flat plate. All the models have a 50mm frontal area for easy comparison
AEROFOIL WITH TAPPINGS
An experimental module for use with the AF10 Air Flow Bench to provide the facilities for investigating the pressure distribution around an aerofoil.
FLOW VISUALISATION
An experimental module for use with the AF10 Air Flow Bench to provide facilities for flow visualisation experiments.
THREE COMPONENT BALANCE
A three-component balance designed for use with the AF1600 Subsonic Wind Tunnel.
COANDĂ EFFECT AND JET FLOW
An experimental module for use with the AF10 Air Flow Bench to investigate the effect of a jet attaching to an adjacent wall examining the Coandă effect evaluation of attachment and separation and demonstration of a fluidic switch/flip-flop (fluidics).
FLOW ROUND A BEND
An experimental module for use with the AF10 Air Flow Bench to investigate the radial pressure distribution around a bend and the pressure distribution along the curved inner and outer walls of the bend.
S1210 AEROFOIL MODEL
An S1210 profile aerofoil of 150 mm chord for use with the AF1450 Subsonic Wind Tunnel.
THREE DIMENSIONAL DRAG MODELS
Five drag investigation models for use with the TecQuipment AF1450 wind tunnel - a streamlined shape, a sphere, hemisphere, "dimpled" sphere, and a flat plate. All the models have a 50mm frontal area for easy comparison.
AIRCRAFT MODEL HIGH WING
A model aircraft with high wing configuration for use in TecQuipment's AF1450 Wind Tunnel.